Saltar al contenido
WikilyWIKILY
Todos los juegos42 wikis · elige tu juego
WikiPlantillas de Construcción

Cambiar de juego

42 wikis · elige tu juego
ARK en la app de WikilyGratis · 4.4★4.6★ · Pantalla completaDescargarDescargar
Tabla de Clasificación

mho

Stone Age

Naturally born Hamburger

Especialidades de construcción

  • mechanix (ab)user
  • tool sharer
  • pve
  • bear breeder
  • 37Plantillas
  • 1285Descargas
  • 60Marcas
  • 1.6Media de me gusta
Stone AgeSiguiente: Metal Worker
1285 descargasfaltan 215
Plantillas de construcción
Bases4

The 24 Sided Sphere-Dome Quarter @ 4 High

This builds a Quarter of a 24 sided Sphere/Dome, placed at 4 walls high, so it can be used as standalone Sphere or as Dome in Buildings - Place/snap this like any Foundation (at Double-Clicked Height) .... there is some whiggle-room but its made for that height! - use the extra Stone Foundation (on the "right") to snap the 2. Quarter & do that for all 4 sides - remove all Thatch (remove all quarterCeilings touching the TekPillars and the Thatch Pillars(they like to stay connected at Distance) ! make sure you "catch" the Sphere/Dome while removing the Scaffolding ! [as example: the screen on how to fill the 24Circle & add "quarterRamp offsets" uses Thatch to mark where Ceilings should be & also how to interconnect the central Pillars with the FoundationRing] Thats basically IT! ----- If you want the Sphere , just either use normal Foundations on the central Pillar, or a Foundation "12er Triangle Circle" inside the Ring to catch it all. The 24 Foundation Ring only exists to snap this all together, but isnt really needed for the Sphere! also the Central Pillar & the outer Ring have a QuarterRamp height difference! so it COULD be connected, just needs some "work" If you want the Dome, build 4(or 5) walls up & build Ceilings in the 12er-triangle-Circle rhythm around the Dome. On the 6 sides where the 2 FullCeilings touch the Dome, replace the one 90° Pillar with 2 small ones & add a Beam between the Ceilings. Now the Dome is connected to the Ceilings & can be held up by whatever Foundation-Grid YOU choose! (see Screens, i just used "thick"ThatchPillars for Visibility) After you made sure you have Foundations & the Connections done , just remove the entire lower half of the Sphere & you got a Dome glued to the Ceiling! - to close the Sphere you can either use TekCeilingDoors all around (snapped to the Beams) or normalCeilings on the outer rim & SecretDoorWalls on like 2-3 layers & the rest HAS TO be TekCeilingDoors! you can place the "next door" by holding existing ones open & then "overlap" em! I also added the "Blade" that made all this.... its just that one Template, snapped 24 times & has every 2."inner Foundation" moved so it all fits inside the Circle but if you should crash a side, just use the Blade to replace it - place a Ceiling outside the 24 sided Ring & snap this Blade to it, so it overwrites the smallFoundations aaand you are DONE! Enjoy your Sphere/Dome

  • 647 estructuras
  • 2 Construcciones
  • 0 Marcas
  • Vanilla
MmhoStone Age17 Nov 2026
Bases21

The 48 Sided Sphere

The 48 sided Sphere These two Templates are all you need to build a 48 sided sphere! (based on Four 12er Triangle Circles) Long Story Short: - place the Foundation Template (doubleclick-Foundation Height) - snap the "Scaffolding Arch" 24times [Counter-Clockwise!] with its Stone snap-Foundation outside of the 48 sided Ring! (the Prototype was clock-wise but that made it...complicated) - if it snaps stupid, just add a Ceiling outside the 48'er & look at the smallFoundations to snap the StoneFoundation "below" that Ceiling [This also makes it easier to see "where you are at"] - remove all Thatch & fill in the "missing" TekCellarDoors by opening their [overlapping]Neighbours & snap them to the Pillar-Beams Thats basically it! [only takes two people like 5-15 Hours on official, depending on how good you are & if nothing goes wrong ;) ] Kudos to my Generous Allies from #Reiz, who enabled me to actually fully test & build this on Official (in record time i might add) Without Them, it would have been impossible for me to give these refined Templates to all of YOU now! ------ This is build on a "double-clicked" Foundation height. There is some Whiggle-Room, but the cleanest Result you will get when snapped-to/placed-at that Height! The central Pillar that will hold it all, is connected to the outer most Part of the Sphere & basically holds that 48 sided Circle on 2 Sides [just with 90° turned Walls instead of normal ones] and can be interconnected on 6 Sides naturally, with small Ceilings & Pillars/Beams(mimicking 1 Ceiling on the outer Wall) You can Place "90° Hidden Door Walls" all around as "Floor" inside to cleanly close the Ceiling with the Walls in the End(Shout-Out to Lia for coming up with the idea & for all the help in building the Sphere) The Arches just "hang" Up&Down from that "horizontal Ring"! When placing the Scaffolding-Arches, its a Dance between having Support for the already existing Sphere & enough Space for the eight 90° TriangleFoundations, that build the Arches. !!! Use 'DebugStructures' and make sure ALL Triangles ALWAYS have all Connections around them(and are not just parked next another, without ALL connections), or you will have Gaps in Support and/or Connection, which might make Things crash...always ONLY snap Triangles in-Line with other Triangles, dont switch Directions by starting again from a Ceiling somewhere !!! - after each Placement, remove all Thatch I'd recommend starting from the Top by disconnecting the "Arch" & also removing all Pillars [they like to stay connected at Distance] and while you are "up there" your Body can also hold open the CellarDoors to allow you to place the ones on the new Arch! If you ever pick up a Metal-Piece with the Scaffolding, dont Panic, just rebuild that one "arm" from Scaffolding(see last screen) If you already destroyed the Scaffolding, you can either get the "Side" back from any of the 4 related "12er Plates", or just "overwrite" that one Scaffolding again, the Hammer will fill in all missing Pieces! Each "Piece" is just either a Wall- or a PillarBeam with 2 smallPillars on its Up&Down Sides, that glue each Arch together the Horizontal "48-Ring" also has a snallPillar on the "Left&Right". Either keep or remove the 48 sided Foundation Circle, its of no Consequence for the Sphere! if you want to, you could fully fill the Top&Bottom, by using the full Scaffolding & by overlapping HARD i think thats all enjoy your Sphere! PS: on a personal Note, i sincerely hope Wildcard will not take this from us by "patching", but lets us enjoy these Gems, Their Game allows us to Create!

  • 1,2k estructuras
  • 2 Construcciones
  • 0 Marcas
  • Vanilla
MmhoStone Age12 Nov 2026
Bases3

24 Half Dome 1 Wall High

This builds half a 24sided Dome, one Wall high above Foundations & is also able to stand alone I chose this height, because it offers useful Ground inside the "Sphere" and can be integrated into any Building really Its also fully created from Foundations! Long Story short: - Place this maximal as high as a "Double-Clicked"Foundation & remove all Thatch! - If you want a full Dome, add a Ceiling to the left "South-Facing" Foundation and build it again - If you want it on a House-Wall, just have a 7-Gap in your Wall & add a small Foundation extra Distance to a "north"-outward-facing Foundation (finish the Dome & add in normal Walls last) Thats all really! Some small TekPillars [that touched a Foundation] might not become "Foundations" , check all & replace those who arent (it sometime happens, idk why!, i build this a bunch of Times & sometimes some Pillars just dont become Foundations...#arklife ) should you place it too high, the 90° Pillars will not become Foundations & you have to either build it high enough, so you can place new Pillars on the lowest (small) Ceilings Or catch the Dome on its side with normal Foundations to remove all Thatch remove all smallCeilings that Touch the TekPillars (& the ThatchPillars, they like to stay connected at Distance) - add a rim of small walls on the lowest beams - Fill all Beams with CeilingDoors (or partially with SecretWallDoors) they have to be open, to place "the Next" and overlap PS: i added the "logic" how this works to the Screens, but its just the 2x12 sided Circles(15° offset) this means, you can use & extend any of these "Blades" inner or outer "12er Circle"...if you want the HalfSphere to continue as a tube for example or fill the Top Enjoy!

  • 618 estructuras
  • 0 Marcas
  • Vanilla
MmhoStone Age12 Nov 2026
Bases17

mho's Hobo Statue

This builds my Hobo-Statue, with Tophat, Backpack, Walking- & Lamp-Stick Im using an earlier Version of this in my own Base,with tek-Generator in the Cube. I just replaced the Backpack with a Cape, to roof-over my Crafting Area Since i see no reason to just "sit on these Statues" any longer, i decided to clean them up and offer refined Versions to YOU all! - Long Story short: place this either with the Feet touching the Ground, or with "floating Toes", - remove all Thatch - fill in the missing Ceilings & Walls (in that order) and a Rim of Pillars between the Backpack & Back to round things up - choose one of the two Foundation Heights in the Back >>> Thats it! only the Backpack & Stick need extended support, the Statue itself is build by & stands on the 2 small Foundation in the Toes The normal Foundation in the left Heel holds the Tophat & the Floors in the Backpack & Body The two small Foundations in the right Heel provide you with two height options (1/4 Ramp Difference) - Either place it low and just use Foundations in the Back for the Backpack & Stick - or have floating Toes & the "deep" Foundations can be used to fundamentalize the whole Ground beneath the Feet (both Heels are just 2 Triangles & a normal Ceiling apart!) I always wanted to give him a better Backpack & maybe a "fancy Lamp", but could never find decent ones, that wouldnt add exorbitant Numbers to the Build... soo i just left it at these simpler ones, but made sure it atleast all works without a Hassle! PS: the smallPillar Beam on the Hexagon inside the Body prevents you from falling into the right Leg, which has no way out, other then flying or destroying Pieces! (alternatively you could ofc just add a wall inside to close the leg) enjoy

  • 592 estructuras
  • 2 Marcas
mhoStone Age9 Oct 2026
Utilidad25

Thick Teleporter Stargate

This places a full-Wall-thick Stargate, able to have a small Teleporter inside. I only build this because i thought it would be pretty cool to literally step into & out-of a Stargate for Teleportation! Its functionally the same as the "new Stargate"[wikily 3049], just 1 Wall thick, instead of a Half. This also creates Everything from Foundations, instead of Pillars, to make Placment easier. - I would say, place this just low enough, that the Ring stands fully on the Ground(might be sunken in tho) - The CellarDoors stand on Pillars and cant touch the Ground, so atleast those must be "high enough for their Pillars" [All Pillars are forced into existence by Foundations on this Build(to avoid the annoying "cant place Pillar at this Height" Sweetspots) feel free to experiment, but a floating Gate seems weird tbh...yet it should be able to be snapped/build pretty high, if you want it in/on a Ceiling!... and ofc a floating Ring needs some Ground-contact, like adding an extra smallFoundation or something] - remove all Thatch Foundations & Ramps and the Scaffolding will just peel-off - Fill in the missing lowest Walls & Ceilings[use the right Flip on the TekCeilings, or the "Chevron" outside will be darker then the rest] - To fill the Gate's Floor, Add 4 quarterCeilings & 2 Ceilings onto the central Pillar - Add 4 Stairs (on the quarterCeilings) and a Teleporter - Fill the outer Rim with Pillar-Beams to your liking and to cover-up most of the Gate's "Ears" - use whatever cover-up you like to hide the Gate's lower end (i prefer TriangleCeilings+Wall, but up to YOU) ...AND YOU ARE DONE! PS: Like the newStargate, the "Floor" is just half a wall higher then the CellarDoor/StoneFoundation & could also be used to make the Gate "Part of a Ceiling" Enjoy & expand the Gate Network ;)

  • 235 estructuras
  • 3 Marcas
mhoStone Age7 Oct 2026
Decorativas25

OceanPlatform Fisher

This places a Fisher Statue with Hat, Rod & Hook ... anywhere really! (i build 4 on Official by Hand so far, since Extinction came out, but this is the cleanest/most universal Version yet & it just seemed worthy enough to be the first Statue i will release!) - I made this to be snapped to an "north-turned/inward-pointing" Ceiling on an OceanPlatform (if you want to glue this to another side, just turn the Ceiling with a small PillarBeam[see Screen]) if snapped to an outward facing Ceiling on the Outside, he would fish in the Pool! [Platforms are basically giant Foundations, so when you place one in front of You, its north-turned] - to finish this, just remove all Thatch & fill the missing Ceilings & Walls [i build this fully with "SecretDoors", since, like any "Door", they can be walked on! i recommend doing the same, so no1 can get stuck!] - the Pillars under the Knees & Beams under the first Leg-Ceilings connect the Fisher to the Platform - all Foundations are only added so his builds flawless on real Ground! ...you can remove them when build on the Platform - If you want to place it on Ground, just create a Line of DEEP Foundations, facing away from whatever Cliff/Edge you want the Legs to be. The SnapCeiling is in/under the "left Buttcheek", soo you need like 3-4 DEEP Foundations Distance from the Edge...And i mean DEEP! You want the Legs to sit on the Ground & not hover after all! - The Hammer might not build all, but YOU will be able to! also, you could add some extra Support in the downward hanging Leg, that will enable you to make the Fishingrod 1 longer & also gives more distance between the Line & the right Foot this one is just limited by the Platforms Reach PS: the smallPillar on top of the Rod is needed to hold the Line & cant be helped, just Skin it "Glass" & its basically invisible Enjoy!

  • 286 estructuras
  • 5 Marcas
  • Vanilla
mhoStone Age5 Oct 2026
Utilidad29

Vertical Dedi-Plate Starter

This places two 90° smallFoundations with 42 Dedis (equal to 6 Ceilings) in front of a normal Foundation, thats lowered by -8 to give it all a flat Surface (and the 90°Foundations and Dedis can still be covered up by Ceilings&Cellar-Doors) - one 90° Foundation is used to offset a Ceiling by 1/4 upwards & to the side now a Dedi snapped to that Ceiling can be used to park Dedis centered on a smallCeilings or Foundations(well or 4 on 1 Ceiling, i guess) - every dedi-stack/line needs a Ceiling or Foundation to start, thats why i build this in a way, that these can just be snapped in a row to expand easily - these Dedi-Stacks dont seem to need Support, but cant touch the Ground or other Buildingpieces around on placing (thats why i just added a Thatch Ceiling at the End, as "Marker") enjoy

  • 56 estructuras
  • 3 Marcas
  • Vanilla
mhoStone Age5 Oct 2026
Bases17

Oval OceanPlatform Hangar

This places a 24 sided Oval over&around an OceanPlatform & basically turns em into a Hangar I build this because its possible & because the Oval and the Platform just fit together effordlessly...which, is beautiful imho! - place a "north-turned" Ceiling "left of the Center" inside the Pool & snap this Template to it [OceanPlatforms are basically giant Foundations, so when you place one in front of you, its "north-turned"] The Scaffolding will build a Wall-Ring with Pillars (outside) on both Ends. These will keep the Oval intact & the Rest is just filled with large Walls The 4 Hexagons on/in the Corners are offset by half a Wall and connect the Platform and the Oval with Pillars! (19+2Hexagons is the Ovals Diameter!) - remove all Thatch...id say, disconnect the Oval first & keep the Rest of the Scaffolding till the End, u never konw... Thats all for the basic Build! If you want to close it, id recommend placing quarterCeilings inside the Oval, then you can just use the normal(and sloped)Walls from the Platform to "cut into them" and close it all there might be some small "Wall-Ears" visible outside, but a Glass skin would fix that [it IS possible to avoid these, but that comes at the cost of MANY Pieces & Complications, YOUR Choice^^] OFC You could also place multiple & turn like 4 of them into one HUGE Hangar! And lastly, as you can see on the Screen, if you have enough flat-Ground to "simulate a Platform", you can just DoubleClick a Foundation somewhere and build a Hangar on normal Ground! YOU just need to tinker a bit, but all the Pieces are there and i even added some convenient extra Foundations & Pillars for this Use-Case! PS: The lonely Pillar in the Center is just the "Grab-Point" for the Template (ignore it) Enjoy

  • 611 estructuras
  • 1 Marcas
  • Vanilla
mhoStone Age5 Oct 2026
Bases7

Tetraeder Toolset

Tetraeder Creation Toolset These 2 "Tools" are all YOU need to create 70.5° Tetraeder's ANYWHERE! (4 sided "Pyramids" build from ONLY Triangles) - Just build a Triangle at whatever Size you want(up to around ~50,then you reach the max Height limit in ARK) - Use a small Wall (to guarantee snap Direction), glue the 70.5° Flipper to it & build the one Foundation, that has the "Floor" facing outward - Add some Triangle Ceilings to that Foundation & catch the Angle with a (thin)Pillar !!![make sure there is NOTHING above the Pillar on placing & it doesnt touch the Foundation, or you might end up with a "not-Foundation" Pillar]!!! - Add a (thin)Beam to the 70.5° Ceiling to glue the Floor & the Angle together (Pillars placed on the 70.5° Angle will be "invisible" and give you a smooth outer Wall without Bumps!) - Do that for all 3 Sides(or the 6 Corner Sides) and you got a Tetraeder! To add Floors use the "Tetraeder Floor-Creator" (up to 25 Floors Height... was limited by the Hammers reach!) - Choose any Side & add an Foundation "L" (or whatever) you need a "north-turned" Snappoint, so just add a small Pillar Beam to a Foundation & that will give you the "forward/North-turned Snap" ...the more distance you give this, the easier it is for the hammer to actually find the right snap... (see Screen) - Place normal Pillars on the Scaffolding until you reach the desired Height & add a small Wall, that will allow you to place Ceilings "Inside" - Use thin Pillars on the 70.5° Sides as Glue to hold the Floors (i would glue them into the Corners, but up to YOU ofc!) - Remove all Scaffolding Fill/close them however YOU like, just know, since its ONLY Triangle Ceilings, the Numbers add up QUICK! To close the Gap between the Ground and the Floor, you can snap ramps to the 70.5° and use "Triangle-Roof-Corners" to close this perfectly (like its made for This) I have one standing around my Well on Ragnarok for over a year now & its just n0ice, i think! PS: choose ONE Floorplate(Orientation)! ... for example: a "north turned" build triangle floor cant/wont connect to "different turns" of Triangles, thats why i didnt release "Tetraeder Corners", the 3 Floors wouldnt want to connect without extra Pillars, soo try ur best & keep it all "ONE BUILD Direction" to avoid support issues! Enjoy building YOUR own 70,5° Tetraeder's!

  • 77 estructuras
  • 2 Construcciones
  • 1 Marcas
  • Vanilla
mhoStone Age15 Sep 2026
Bases23

24 Ribbon Base Barebone

This creates a 24 sided Base-Ribbon from 2 foundations who build everything "clockwise" [2x 12sided circle plates] - remove thatch, THATS ALL u need to do It was Originally designed to be "placed deep" so that the last walls are sunken in and being purely held up by the normal foundations & therefor relies on the connection between the ring & foundations to stay up! That being said, i added pillars on the lowest walls ends (8 overall), that can keep the loop standing alone (for 99.99%, if placed high enough ofc ... see screen) there are 2 pillars for each "circle side", on the sloped walls, who glue together 6 walls. if you want to skin a pillar or something, feel free to remove some walls to touch a pillar, just keep the "grid" intact! - if you want to "get foundations back" from an empty loop, do what i did: "pull down any of the circles sides to the ground & use my 'foundation flipper' to get them" - ceilings from the foundations will just regognize the 90° walls on the "left&right" as normal & connect with them, wich means they will hold this entire loop! (as long as we keep that connection alife) ... this also means we can replace a 90° wall witha normal one, for a door, or something! |Building examples: - all foundations & ceilings i placed are ONLY SUGGESTIONS! (and support, i guess) we can fill this loop however we like after all - if you want to "stay with it" just use a "24" sided circle or pill-shape inside as floor to make it part of the loop [as the template has] then you can provide extended support for the loop & make your floor tightly fit - another solid option is to just fill "both ends" with a 12er-plate & skin those with glass or water, to have a full closed interior & just use a ceiling-door to replace one of the lowest walls on the ring as entrance (see last screen) [the small "ears" outside cant be helped...but skinned!] PS: Greenhouse Walls will provide 300% i think thats all Enjoy!

  • 544 estructuras
  • 2 Marcas
  • Vanilla
mhoStone Age13 Sep 2026
Decorativas97

new Stargate

The new Stargate This places a vertical 24sided small-Wall Ring with two Tek Cellar Doors "inside it" (-16 offset) to mimic a "true 9 Chevron Stargate" ! It only took me around 11 Month to get this right again & into an easy instant-build Template, after Wildcard made all "inner-Arches" illegal over the last Year... this one just doesnt use inner Arches at all now & works - just place it low enough that the 2 lowest Pillars in the Ring are ontop/above ground (those 2 will build the entire circle for YOU!) you could place it higher, but then the Gate would start to float, wich looks weird tbh - remove all Thatch get rid of the Ramps & the Scaffolding will just peel off ... the 3 small Foundations just force the Pillars for the CellarDoors & Stairs into existence! - finish the Ring by placing the missing lowest side (Wall, 2 Ceilings & a PillarBeam) these are missing, so this can only build itself correctly! - add a small Stair "in the Back" and cover the Ring's "floor" with 6 small Ceilings [see Screen], so no1 can fall into it & get stuck. Now place the missing Stairs & 2 more down the other Side - Fill the outer Rim with small Pillar Beams (cant leave them in, because of the 40-Piece limit...) - the Triangles on the Sides are only there to cover-up the lower Parts of the CellarDoors, replace them if you want to, or find a better cover-up, they are of no consequence for the circle! Thats it! PS: if you really want to, i guess it could be possible to integrate this into a ceiling floor & have it look like the "round Stone Portal" on ceilings ... its a bit tricky, but the foundation in the front & the stairs in the back, could be used to have this "inside a base", but its not designed for it! [the foundation is just positioned below the cellar door,like on all my gates so far, so the ceilings from the stairs are just "half a wall higher" inside the circle] Enjoy an ancient Alteran Marvel of Engineering in YOUR Base!

  • 224 estructuras
  • 2 Marcas
  • Vanilla
mhoStone Age10 Sep 2026
Bases12

New Chapel Arch

The New Chapel's Arch This build replicates the "Front Arch" i build for my Chapel at the end of 2025, but they patched it impossible and i never released it, so now i made THIS one for you all! The Gate-Arch, Window-Ring & outer Arch are one Build The CellarDoors & "Wall"Ceiling Plates are offset by -16 "inside" Which makes this 3 "independent" Builds with separate Support! (this could be all fused into one, but it would require a whole pile of offsets & supports, which dont make sense to have really) - Place this like any foundation, or glue it into any 7-9 gap in a wall (leave the central (north turned) Foundation & snap this to it) - Make sure its placed low/high enough that the 8 essential Pillars see Ground (see Screen) , the 4 lower ones should be barely off the ground & the 4 higher ones will be created by the Thatch Foundations, but need to end up "low" enough so they become Foundations! this will also make sure that the Scaffolding "outside" is at the right Height! ...some small Pillars below the Cellar Doors will not auto-build, its "normal", thats why they have 4 - Remove all Thatch (disconnect the Ramps from the "Rings" first, leave the Scaffolding till last, just to be sure) - Fill the Ring & Arches on both sides with small Ceilings (and the 1 wall ontop of the window ring!) - Fill in the front & back "WallCelings" and the Windows - If you want to close/attach the normal Walls, you have to remove the outer small Walls on the big Arch (see Screen) & let the Walls "cut into" the Arches ceilings now replace the Arches small Walls - As with the other Gates, just use Foundations to cut through the Arches "Feet" - Fill the Arch/Ring/Gate with PillarBeams as much as u like & to close evtl Holes! Fully decked-out this Build can end up at around 650 Pieces PS: you could use the Arch itself as "Roof", but it would cost 14 small & 6 normal Walls just to have one Foundation length covered, that adds up quick!^^ Enjoy

  • 597 estructuras
  • 0 Marcas
  • Vanilla
mhoStone Age8 Sep 2026
Entradas: 37 · Página 1 de 4
Únete a la comunidad de creadoresLas personas que construyen la wiki de ARK: Survival Ascended están en nuestro Discord. Haz preguntas o sugiere páginas.Unirse a Discord (abre Discord en una pestaña nueva)