Saltar al contenido
WikilyWIKILY
Todos los juegos42 wikis · elige tu juego
WikiPlantillas de Construcción

Cambiar de juego

42 wikis · elige tu juego
ARK en la app de WikilyGratis · 4.4★4.6★ · Pantalla completaDescargarDescargar
Explorar plantillas

Bases

New Chapel Arch

mhoStone AgeSubido el 8 sept 2026
  • 597estructuras
  • 1Construcciones
  • 13Descargas
  • 0Marcas
Template ID3038Guía de consola
Marcas: 0

Descripción

The New Chapel's Arch This build replicates the "Front Arch" i build for my Chapel at the end of 2025, but they patched it impossible and i never released it, so now i made THIS one for you all! The Gate-Arch, Window-Ring & outer Arch are one Build The CellarDoors & "Wall"Ceiling Plates are offset by -16 "inside" Which makes this 3 "independent" Builds with separate Support! (this could be all fused into one, but it would require a whole pile of offsets & supports, which dont make sense to have really) - Place this like any foundation, or glue it into any 7-9 gap in a wall (leave the central (north turned) Foundation & snap this to it) - Make sure its placed low/high enough that the 8 essential Pillars see Ground (see Screen) , the 4 lower ones should be barely off the ground & the 4 higher ones will be created by the Thatch Foundations, but need to end up "low" enough so they become Foundations! this will also make sure that the Scaffolding "outside" is at the right Height! ...some small Pillars below the Cellar Doors will not auto-build, its "normal", thats why they have 4 - Remove all Thatch (disconnect the Ramps from the "Rings" first, leave the Scaffolding till last, just to be sure) - Fill the Ring & Arches on both sides with small Ceilings (and the 1 wall ontop of the window ring!) - Fill in the front & back "WallCelings" and the Windows - If you want to close/attach the normal Walls, you have to remove the outer small Walls on the big Arch (see Screen) & let the Walls "cut into" the Arches ceilings now replace the Arches small Walls - As with the other Gates, just use Foundations to cut through the Arches "Feet" - Fill the Arch/Ring/Gate with PillarBeams as much as u like & to close evtl Holes! Fully decked-out this Build can end up at around 650 Pieces PS: you could use the Arch itself as "Roof", but it would cost 14 small & 6 normal Walls just to have one Foundation length covered, that adds up quick!^^ Enjoy

Cómo conseguirlo en consola

Guía completa de consola

Los jugadores de consola (PlayStation, Xbox) pueden descargar y colocar esta plantilla directamente en el juego con el mod Template Hammer Importer.

  1. 1Instalar el modOpen the in-game mod browser and search "Wikily" or "Template Hammer Importer".
  2. 2Fabricar el importadorEntra en Un jugador + Modo Creativo y fabrica el Wikily Template Importer (1 fibra).
  3. 3Introducir el ID de plantillaUsa el objeto, introduce el ID de plantilla 3038 y el índice de construcción, y luego colócalo.

Construcciones1 file

  • 1

    New Chapel Arch

    597 estructuras

    Creado por: mho

    ID de plantilla: 3038 · Edificio: 0

    Más de mho

    Ver Todo
    Bases4

    The 24 Sided Sphere-Dome Quarter @ 4 High

    This builds a Quarter of a 24 sided Sphere/Dome, placed at 4 walls high, so it can be used as standalone Sphere or as Dome in Buildings - Place/snap this like any Foundation (at Double-Clicked Height) .... there is some whiggle-room but its made for that height! - use the extra Stone Foundation (on the "right") to snap the 2. Quarter & do that for all 4 sides - remove all Thatch (remove all quarterCeilings touching the TekPillars and the Thatch Pillars(they like to stay connected at Distance) ! make sure you "catch" the Sphere/Dome while removing the Scaffolding ! [as example: the screen on how to fill the 24Circle & add "quarterRamp offsets" uses Thatch to mark where Ceilings should be & also how to interconnect the central Pillars with the FoundationRing] Thats basically IT! ----- If you want the Sphere , just either use normal Foundations on the central Pillar, or a Foundation "12er Triangle Circle" inside the Ring to catch it all. The 24 Foundation Ring only exists to snap this all together, but isnt really needed for the Sphere! also the Central Pillar & the outer Ring have a QuarterRamp height difference! so it COULD be connected, just needs some "work" If you want the Dome, build 4(or 5) walls up & build Ceilings in the 12er-triangle-Circle rhythm around the Dome. On the 6 sides where the 2 FullCeilings touch the Dome, replace the one 90° Pillar with 2 small ones & add a Beam between the Ceilings. Now the Dome is connected to the Ceilings & can be held up by whatever Foundation-Grid YOU choose! (see Screens, i just used "thick"ThatchPillars for Visibility) After you made sure you have Foundations & the Connections done , just remove the entire lower half of the Sphere & you got a Dome glued to the Ceiling! - to close the Sphere you can either use TekCeilingDoors all around (snapped to the Beams) or normalCeilings on the outer rim & SecretDoorWalls on like 2-3 layers & the rest HAS TO be TekCeilingDoors! you can place the "next door" by holding existing ones open & then "overlap" em! I also added the "Blade" that made all this.... its just that one Template, snapped 24 times & has every 2."inner Foundation" moved so it all fits inside the Circle but if you should crash a side, just use the Blade to replace it - place a Ceiling outside the 24 sided Ring & snap this Blade to it, so it overwrites the smallFoundations aaand you are DONE! Enjoy your Sphere/Dome

    • 647 estructuras
    • 2 Construcciones
    • 1 Marcas
    • Vanilla
    Bases25

    The 48 Sided Sphere

    The 48 sided Sphere These two Templates are all you need to build a 48 sided sphere! (based on Four 12er Triangle Circles) Long Story Short: - place the Foundation Template (doubleclick-Foundation Height) - snap the "Scaffolding Arch" 24times [Counter-Clockwise!] with its Stone snap-Foundation outside of the 48 sided Ring! (the Prototype was clock-wise but that made it...complicated) - if it snaps stupid, just add a Ceiling outside the 48'er & look at the smallFoundations to snap the StoneFoundation "below" that Ceiling [This also makes it easier to see "where you are at"] - remove all Thatch & fill in the "missing" TekCellarDoors by opening their [overlapping]Neighbours & snap them to the Pillar-Beams Thats basically it! [only takes two people like 5-15 Hours on official, depending on how good you are & if nothing goes wrong ;) ] Kudos to my Generous Allies from #Reiz, who enabled me to actually fully test & build this on Official (in record time i might add) Without Them, it would have been impossible for me to give these refined Templates to all of YOU now! ------ This is build on a "double-clicked" Foundation height. There is some Whiggle-Room, but the cleanest Result you will get when snapped-to/placed-at that Height! The central Pillar that will hold it all, is connected to the outer most Part of the Sphere & basically holds that 48 sided Circle on 2 Sides [just with 90° turned Walls instead of normal ones] and can be interconnected on 6 Sides naturally, with small Ceilings & Pillars/Beams(mimicking 1 Ceiling on the outer Wall) You can Place "90° Hidden Door Walls" all around as "Floor" inside to cleanly close the Ceiling with the Walls in the End(Shout-Out to Lia for coming up with the idea & for all the help in building the Sphere) The Arches just "hang" Up&Down from that "horizontal Ring"! When placing the Scaffolding-Arches, its a Dance between having Support for the already existing Sphere & enough Space for the eight 90° TriangleFoundations, that build the Arches. !!! Use 'DebugStructures' and make sure ALL Triangles ALWAYS have all Connections around them(and are not just parked next another, without ALL connections), or you will have Gaps in Support and/or Connection, which might make Things crash...always ONLY snap Triangles in-Line with other Triangles, dont switch Directions by starting again from a Ceiling somewhere !!! - after each Placement, remove all Thatch I'd recommend starting from the Top by disconnecting the "Arch" & also removing all Pillars [they like to stay connected at Distance] and while you are "up there" your Body can also hold open the CellarDoors to allow you to place the ones on the new Arch! If you ever pick up a Metal-Piece with the Scaffolding, dont Panic, just rebuild that one "arm" from Scaffolding(see last screen) If you already destroyed the Scaffolding, you can either get the "Side" back from any of the 4 related "12er Plates", or just "overwrite" that one Scaffolding again, the Hammer will fill in all missing Pieces! Each "Piece" is just either a Wall- or a PillarBeam with 2 smallPillars on its Up&Down Sides, that glue each Arch together the Horizontal "48-Ring" also has a snallPillar on the "Left&Right". Either keep or remove the 48 sided Foundation Circle, its of no Consequence for the Sphere! if you want to, you could fully fill the Top&Bottom, by using the full Scaffolding & by overlapping HARD i think thats all enjoy your Sphere! PS: on a personal Note, i sincerely hope Wildcard will not take this from us by "patching", but lets us enjoy these Gems, Their Game allows us to Create!

    • 1,2k estructuras
    • 2 Construcciones
    • 0 Marcas
    • Vanilla
    Bases6

    24 Half Dome 1 Wall High

    This builds half a 24sided Dome, one Wall high above Foundations & is also able to stand alone I chose this height, because it offers useful Ground inside the "Sphere" and can be integrated into any Building really Its also fully created from Foundations! Long Story short: - Place this maximal as high as a "Double-Clicked"Foundation & remove all Thatch! - If you want a full Dome, add a Ceiling to the left "South-Facing" Foundation and build it again - If you want it on a House-Wall, just have a 7-Gap in your Wall & add a small Foundation extra Distance to a "north"-outward-facing Foundation (finish the Dome & add in normal Walls last) Thats all really! Some small TekPillars [that touched a Foundation] might not become "Foundations" , check all & replace those who arent (it sometime happens, idk why!, i build this a bunch of Times & sometimes some Pillars just dont become Foundations...#arklife ) should you place it too high, the 90° Pillars will not become Foundations & you have to either build it high enough, so you can place new Pillars on the lowest (small) Ceilings Or catch the Dome on its side with normal Foundations to remove all Thatch remove all smallCeilings that Touch the TekPillars (& the ThatchPillars, they like to stay connected at Distance) - add a rim of small walls on the lowest beams - Fill all Beams with CeilingDoors (or partially with SecretWallDoors) they have to be open, to place "the Next" and overlap PS: i added the "logic" how this works to the Screens, but its just the 2x12 sided Circles(15° offset) this means, you can use & extend any of these "Blades" inner or outer "12er Circle"...if you want the HalfSphere to continue as a tube for example or fill the Top Enjoy!

    • 618 estructuras
    • 0 Marcas
    • Vanilla
    Bases17

    mho's Hobo Statue

    This builds my Hobo-Statue, with Tophat, Backpack, Walking- & Lamp-Stick Im using an earlier Version of this in my own Base,with tek-Generator in the Cube. I just replaced the Backpack with a Cape, to roof-over my Crafting Area Since i see no reason to just "sit on these Statues" any longer, i decided to clean them up and offer refined Versions to YOU all! - Long Story short: place this either with the Feet touching the Ground, or with "floating Toes", - remove all Thatch - fill in the missing Ceilings & Walls (in that order) and a Rim of Pillars between the Backpack & Back to round things up - choose one of the two Foundation Heights in the Back >>> Thats it! only the Backpack & Stick need extended support, the Statue itself is build by & stands on the 2 small Foundation in the Toes The normal Foundation in the left Heel holds the Tophat & the Floors in the Backpack & Body The two small Foundations in the right Heel provide you with two height options (1/4 Ramp Difference) - Either place it low and just use Foundations in the Back for the Backpack & Stick - or have floating Toes & the "deep" Foundations can be used to fundamentalize the whole Ground beneath the Feet (both Heels are just 2 Triangles & a normal Ceiling apart!) I always wanted to give him a better Backpack & maybe a "fancy Lamp", but could never find decent ones, that wouldnt add exorbitant Numbers to the Build... soo i just left it at these simpler ones, but made sure it atleast all works without a Hassle! PS: the smallPillar Beam on the Hexagon inside the Body prevents you from falling into the right Leg, which has no way out, other then flying or destroying Pieces! (alternatively you could ofc just add a wall inside to close the leg) enjoy

    • 592 estructuras
    • 2 Marcas
    mhoStone Age9 Oct 2026

    Plantillas similaresMás construcciones en esta categoría

    Ver Todo
    Bases13,6k

    Tony's Workshop

    All-in-one base with greenhouse. Skins used: - Frontiers -Steampunk - Klinger Additional Skin Cosmetics Rustic GreenHouse

    • 1,5k estructuras
    • 272 Marcas
    • Vanilla
    Bases8,9k

    Aono All in One Base [ARGEN and ANKY]

    This is an official PVE compatible base that allows you to bring in resources using the Argento Anky using a cellar door. It is equipped with a full range of facilities, including an industrial forge and industrial grinder. The layout has been carefully designed to make it easy to bring in resources and craft, making it extremely user-friendly. The skin used is the Steampunk skin from the paid DLC, Bob's Tall Tales. こちらは公式PVE対応のセラードア使ってアルゲンアンキーで資源の搬入が可能な基地です。 インダストリアルフォージやインダストリアルグラインダーなどの設備は一通りそろっています。 資源搬入やクラフトなどがしやすいように配置を工夫して非常に使いやすい設計にしております。 スキンは有料DLC、ボブズトールテイルズのスチームパンクスキンを使用しています。

    • 852 estructuras
    • 225 Marcas
    • Vanilla
    Bases7,9k

    Epic Steampunk Starter House (LolsAtLance)

    Welcome to my Steampunk Starter House build in ARK: Aberration Ascended made completely from thatch! This build utilizes Bob’s Tall Tales Structure Skins, with a special focus on the Steampunk Skin to transform a simple thatch house into a unique, immersive base. PLEASE WATCH VIDEO TO SEE WHERE TO APPLY SKINS. Whether you’re new to ARK: Survival Ascended or just looking for some inspiration, this steampunk starter house is the perfect blend of style and practicality.

    • 615 estructuras
    • 171 Marcas
    • Vanilla
    Bases7,5k

    Basic Bunkhouse with Greenhouse

    All wood bunkhouse with loft and green house. Room for plenty of tribemates and equipment. Skinned in Frontier skins and lit with Frontier oil lamps and chandeliers.

    • 272 estructuras
    • 201 Marcas
    • Vanilla
    Cargando discusión...
    Únete a la comunidad de creadoresLas personas que construyen la wiki de ARK: Survival Ascended están en nuestro Discord. Haz preguntas o sugiere páginas.Unirse a Discord (abre Discord en una pestaña nueva)