Dual 90° Ceiling Flipper

mhoStone AgeSubido el 8 ago 2026

10estructuras
1Construcciones
11Descargas
1Marcas

Template ID2899Guía de consola

Marcas: 1

Discord

Descripción

this creates 2 (4) outward facing 90° ceilings offset by 8 each (16 is needed to overlap/stack & 8 can reconnect to the original position) (its the tool i used for the Twin Repli!) just build a pillar down , snap this to it & bring 2 of these ceilings up there ( ceilings = walls , so as long as you can build cubes, you can bring both sides to the right spot) you can glue them to any ceiling if you build a 90° pillar + a beam snapped to that pillar "up there" i guarantee it will stay up on official after removing the scaffolding (there are other pieces that can glue this, but pillar+beam WORKS reliable!),the game needs to think there is a "foundation", so it needs a 90° pillar & the 90°beam on that pillar can then connect to other things (like any normal ceiling) enjoy

Cómo conseguirlo en consola

Guía completa de consola

Los jugadores de consola (PlayStation, Xbox) pueden descargar y colocar esta plantilla directamente en el juego con el mod Template Hammer Importer.

1Instalar el modOpen the in-game mod browser and search "Wikily" or "Template Hammer Importer".
2Fabricar el importadorEntra en Un jugador + Modo Creativo y fabrica el Wikily Template Importer (1 fibra).
3Introducir el ID de plantillaUsa el objeto, introduce el ID de plantilla 2899 y el índice de construcción, y luego colócalo.

Construcciones1 file

1
Dual 90° Ceiling Flipper
10 estructuras
Creado por: mho
ID de plantilla: 2899 · Edificio: 0

estructuras10 estructuras · 3 types

Coste de fabricación

Más de mho

Ver Todo

Bases12

mho's Hobo Statue

This builds my Hobo-Statue, with Tophat, Backpack, Walking- & Lamp-Stick Im using an earlier Version of this in my own Base,with tek-Generator in the Cube. I just replaced the Backpack with a Cape, to roof-over my Crafting Area Since i see no reason to just "sit on these Statues" any longer, i decided to clean them up and offer refined Versions to YOU all! - Long Story short: place this either with the Feet touching the Ground, or with "floating Toes", - remove all Thatch - fill in the missing Ceilings & Walls (in that order) and a Rim of Pillars between the Backpack & Back to round things up - choose one of the two Foundation Heights in the Back >>> Thats it! only the Backpack & Stick need extended support, the Statue itself is build by & stands on the 2 small Foundation in the Toes The normal Foundation in the left Heel holds the Tophat & the Floors in the Backpack & Body The two small Foundations in the right Heel provide you with two height options (1/4 Ramp Difference) - Either place it low and just use Foundations in the Back for the Backpack & Stick - or have floating Toes & the "deep" Foundations can be used to fundamentalize the whole Ground beneath the Feet (both Heels are just 2 Triangles & a normal Ceiling apart!) I always wanted to give him a better Backpack & maybe a "fancy Lamp", but could never find decent ones, that wouldnt add exorbitant Numbers to the Build... soo i just left it at these simpler ones, but made sure it atleast all works without a Hassle! PS: the smallPillar Beam on the Hexagon inside the Body prevents you from falling into the right Leg, which has no way out, other then flying or destroying Pieces! (alternatively you could ofc just add a wall inside to close the leg) enjoy

592 estructuras
2 Marcas

Utilidad13

Thick Teleporter Stargate

This places a full-Wall-thick Stargate, able to have a small Teleporter inside. I only build this because i thought it would be pretty cool to literally step into & out-of a Stargate for Teleportation! Its functionally the same as the "new Stargate"[wikily 3049], just 1 Wall thick, instead of a Half. This also creates Everything from Foundations, instead of Pillars, to make Placment easier. - I would say, place this just low enough, that the Ring stands fully on the Ground(might be sunken in tho) - The CellarDoors stand on Pillars and cant touch the Ground, so atleast those must be "high enough for their Pillars" [All Pillars are forced into existence by Foundations on this Build(to avoid the annoying "cant place Pillar at this Height" Sweetspots) feel free to experiment, but a floating Gate seems weird tbh...yet it should be able to be snapped/build pretty high, if you want it in/on a Ceiling!... and ofc a floating Ring needs some Ground-contact, like adding an extra smallFoundation or something] - remove all Thatch Foundations & Ramps and the Scaffolding will just peel-off - Fill in the missing lowest Walls & Ceilings[use the right Flip on the TekCeilings, or the "Chevron" outside will be darker then the rest] - To fill the Gate's Floor, Add 4 quarterCeilings & 2 Ceilings onto the central Pillar - Add 4 Stairs (on the quarterCeilings) and a Teleporter - Fill the outer Rim with Pillar-Beams to your liking and to cover-up most of the Gate's "Ears" - use whatever cover-up you like to hide the Gate's lower end (i prefer TriangleCeilings+Wall, but up to YOU) ...AND YOU ARE DONE! PS: Like the newStargate, the "Floor" is just half a wall higher then the CellarDoor/StoneFoundation & could also be used to make the Gate "Part of a Ceiling" Enjoy & expand the Gate Network ;)

235 estructuras
3 Marcas

Decorativas17

OceanPlatform Fisher

This places a Fisher Statue with Hat, Rod & Hook ... anywhere really! (i build 4 on Official by Hand so far, since Extinction came out, but this is the cleanest/most universal Version yet & it just seemed worthy enough to be the first Statue i will release!) - I made this to be snapped to an "north-turned/inward-pointing" Ceiling on an OceanPlatform (if you want to glue this to another side, just turn the Ceiling with a small PillarBeam[see Screen]) if snapped to an outward facing Ceiling on the Outside, he would fish in the Pool! [Platforms are basically giant Foundations, so when you place one in front of You, its north-turned] - to finish this, just remove all Thatch & fill the missing Ceilings & Walls [i build this fully with "SecretDoors", since, like any "Door", they can be walked on! i recommend doing the same, so no1 can get stuck!] - the Pillars under the Knees & Beams under the first Leg-Ceilings connect the Fisher to the Platform - all Foundations are only added so his builds flawless on real Ground! ...you can remove them when build on the Platform - If you want to place it on Ground, just create a Line of DEEP Foundations, facing away from whatever Cliff/Edge you want the Legs to be. The SnapCeiling is in/under the "left Buttcheek", soo you need like 3-4 DEEP Foundations Distance from the Edge...And i mean DEEP! You want the Legs to sit on the Ground & not hover after all! - The Hammer might not build all, but YOU will be able to! also, you could add some extra Support in the downward hanging Leg, that will enable you to make the Fishingrod 1 longer & also gives more distance between the Line & the right Foot this one is just limited by the Platforms Reach PS: the smallPillar on top of the Rod is needed to hold the Line & cant be helped, just Skin it "Glass" & its basically invisible Enjoy!

286 estructuras
5 Marcas
Vanilla

Utilidad17

Vertical Dedi-Plate Starter

This places two 90° smallFoundations with 42 Dedis (equal to 6 Ceilings) in front of a normal Foundation, thats lowered by -8 to give it all a flat Surface (and the 90°Foundations and Dedis can still be covered up by Ceilings&Cellar-Doors) - one 90° Foundation is used to offset a Ceiling by 1/4 upwards & to the side now a Dedi snapped to that Ceiling can be used to park Dedis centered on a smallCeilings or Foundations(well or 4 on 1 Ceiling, i guess) - every dedi-stack/line needs a Ceiling or Foundation to start, thats why i build this in a way, that these can just be snapped in a row to expand easily - these Dedi-Stacks dont seem to need Support, but cant touch the Ground or other Buildingpieces around on placing (thats why i just added a Thatch Ceiling at the End, as "Marker") enjoy