Sin vista previaBases97Plantillas de construcción
Browse and download community building templates
Sin vista previaBases97
Bases33
Bases22Raised Viking Longhouse
A raised viking longhouse with tons of room for storage underneath the base.
- 1,6k estructuras
- 2 Marcas
Bases22Thinner
It's a lean, tight, narrow, and long tunnel, but it still has room for the basic equipment: refrigerators, a power generator, a grill, a fabricator, a grinder, and space for storage boxes and for beds (It will be comfortable for up to 3 players, but more are possible). The proposed layout is shown in the image. Before building, make sure the first level is completely above ground.
- 171 estructuras
- 2 Marcas
Bases3148 sided House +Floors +Roof
48Sided House with Floors & Roof - its the 48 sided small foundation circle with large walls all around - the upper rim is a layer of quarter walls, that are needed to offset the triangle roofs & also have the pillars in them to make it all "one ring" [if you want to make the foundation ring "one" , you need to add pillars on the foundations] - the entire center is just one of the four 12 sided circle plates lowered by 16 & i gave it connection to the outer rim on 3 sides with 8 offset [meaning you can freely overlap these floors & have ceilings cut into foundations] - to close the floors, fill the outer rim with triangles & then the leftover 90°gaps with quarter ceilings - lastly use quarter ceilings all around(on the large walls) to cover up your floor plates pointy ends & id recommend also adding a ring of pillar-beams! it gives it an overall solid look you can have any one wall/pillar going up to hold the floors/ceiling, i just used 3 pillars for symmetry & safety^^ - the triangle roofs would block the ramps "below them" from being build, so these have to be added by hand later on to close the roof - as final touch add a ring of railing onto the ceiling plate on top (its a great spot for a teleporter for example) - the 3 "gates" are made out of 4 tek ceiling doors, held by that pillar frame PS: the hammer is sometimes stupid & places foundations without connection to all neighbouring ones... replacing them by hand will connect to all sides.... idk why, but #arklife i think thats all enjoy
- 688 estructuras
- 1 Marcas
Bases106th wall height incriments
wall height broken down into 6th increments. all credit to https://www.youtube.com/@captainfatdog for this template. Followed his video and remade in game to save as template.
- 31 estructuras
- 3 Marcas
Bases40
Bases40Sloane's Den
Here’s Sloane's Den! a simple thatch build (obvs PVE) that’s completely vanilla-friendly, but still looks great thanks to some skin work. It’s got three full floors and feels pretty roomy for its size. You can use it as a base, a small workshop, or even a dino pen like I did for smaller tames. Super easy to make, super flexible...perfect for early game or a chill secondary base. Or for those cute wittle dinos!
- 605 estructuras
- 0 Marcas
Sin vista previaBases89
Bases10
Bases1924 Ribbon Base Barebone
This creates a 24 sided Base-Ribbon from 2 foundations who build everything "clockwise" [2x 12sided circle plates] - remove thatch, THATS ALL u need to do It was Originally designed to be "placed deep" so that the last walls are sunken in and being purely held up by the normal foundations & therefor relies on the connection between the ring & foundations to stay up! That being said, i added pillars on the lowest walls ends (8 overall), that can keep the loop standing alone (for 99.99%, if placed high enough ofc ... see screen) there are 2 pillars for each "circle side", on the sloped walls, who glue together 6 walls. if you want to skin a pillar or something, feel free to remove some walls to touch a pillar, just keep the "grid" intact! - if you want to "get foundations back" from an empty loop, do what i did: "pull down any of the circles sides to the ground & use my 'foundation flipper' to get them" - ceilings from the foundations will just regognize the 90° walls on the "left&right" as normal & connect with them, wich means they will hold this entire loop! (as long as we keep that connection alife) ... this also means we can replace a 90° wall witha normal one, for a door, or something! |Building examples: - all foundations & ceilings i placed are ONLY SUGGESTIONS! (and support, i guess) we can fill this loop however we like after all - if you want to "stay with it" just use a "24" sided circle or pill-shape inside as floor to make it part of the loop [as the template has] then you can provide extended support for the loop & make your floor tightly fit - another solid option is to just fill "both ends" with a 12er-plate & skin those with glass or water, to have a full closed interior & just use a ceiling-door to replace one of the lowest walls on the ring as entrance (see last screen) [the small "ears" outside cant be helped...but skinned!] PS: Greenhouse Walls will provide 300% i think thats all Enjoy!
- 544 estructuras
- 2 Marcas
Bases29Mis - TEDDY BEAR
The base is inspired by the object from the 1981 Polish film "Teddy Bear" ("MIŚ") Yes, it's a large teddy bear. One leg simply contains a staircase, the other contains small floors. The palms contain small rooms – these could serve as bedrooms. The interior is mostly empty space. I think it's a really funny base
- 1,1k estructuras
- 1 Marcas
Bases39
Bases19china国(参考版，暂无法直接使用)
28格竖地基打底 在第6格铺设天花板门衔接china国，高度自由调整 竖地基与 china国 吸附存在问题，目前无法处理 提供一种思路参考
- 660 estructuras
- 2 Construcciones
- 2 Marcas
Bases28hourglass
This is a multilevel base build! lots of space for you and your friends to have inside
- 1,1k estructuras
- 1 Marcas
Bases28
Bases38[ 21 Vault ] Triple Vault Stack "Centered"
There are already many Stack Vaults, but this one is precisely centered for 5 foundations.
- 76 estructuras
- 2 Construcciones
- 0 Marcas
Bases26Double waterpen
Double water pen with livable space on top you will need to add to gates to the top half of the water pen it can be built in any material
- 931 estructuras
- 1 Marcas
Bases15
Bases15mho's Hobo Statue
This builds my Hobo-Statue, with Tophat, Backpack, Walking- & Lamp-Stick Im using an earlier Version of this in my own Base,with tek-Generator in the Cube. I just replaced the Backpack with a Cape, to roof-over my Crafting Area Since i see no reason to just "sit on these Statues" any longer, i decided to clean them up and offer refined Versions to YOU all! - Long Story short: place this either with the Feet touching the Ground, or with "floating Toes", - remove all Thatch - fill in the missing Ceilings & Walls (in that order) and a Rim of Pillars between the Backpack & Back to round things up - choose one of the two Foundation Heights in the Back >>> Thats it! only the Backpack & Stick need extended support, the Statue itself is build by & stands on the 2 small Foundation in the Toes The normal Foundation in the left Heel holds the Tophat & the Floors in the Backpack & Body The two small Foundations in the right Heel provide you with two height options (1/4 Ramp Difference) - Either place it low and just use Foundations in the Back for the Backpack & Stick - or have floating Toes & the "deep" Foundations can be used to fundamentalize the whole Ground beneath the Feet (both Heels are just 2 Triangles & a normal Ceiling apart!) I always wanted to give him a better Backpack & maybe a "fancy Lamp", but could never find decent ones, that wouldnt add exorbitant Numbers to the Build... soo i just left it at these simpler ones, but made sure it atleast all works without a Hassle! PS: the smallPillar Beam on the Hexagon inside the Body prevents you from falling into the right Leg, which has no way out, other then flying or destroying Pieces! (alternatively you could ofc just add a wall inside to close the leg) enjoy
- 592 estructuras
- 2 Marcas
Bases35
Bases14
Bases34True Starter Base
A True Starter Base made with Thatch only and Relatively Small
- 88 estructuras
- 0 Marcas
Bases14