Önizleme yokÜsler42Yapı şablonları
Browse and download community building templates
Önizleme yokÜsler42Önizleme yokÜsler43AIO House GK
Medium size AIO house with lot of storage space, lot of different benches and more ^^ Any advice and/or comment welcome!! =D
- 1,3k yapılar
- 0 Beğenmeler
Önizleme yokÜsler42
Üsler6Tetraeder Toolset
Tetraeder Creation Toolset These 2 "Tools" are all YOU need to create 70.5° Tetraeder's ANYWHERE! (4 sided "Pyramids" build from ONLY Triangles) - Just build a Triangle at whatever Size you want(up to around ~50,then you reach the max Height limit in ARK) - Use a small Wall (to guarantee snap Direction), glue the 70.5° Flipper to it & build the one Foundation, that has the "Floor" facing outward - Add some Triangle Ceilings to that Foundation & catch the Angle with a (thin)Pillar !!![make sure there is NOTHING above the Pillar on placing & it doesnt touch the Foundation, or you might end up with a "not-Foundation" Pillar]!!! - Add a (thin)Beam to the 70.5° Ceiling to glue the Floor & the Angle together (Pillars placed on the 70.5° Angle will be "invisible" and give you a smooth outer Wall without Bumps!) - Do that for all 3 Sides(or the 6 Corner Sides) and you got a Tetraeder! To add Floors use the "Tetraeder Floor-Creator" (up to 25 Floors Height... was limited by the Hammers reach!) - Choose any Side & add an Foundation "L" (or whatever) you need a "north-turned" Snappoint, so just add a small Pillar Beam to a Foundation & that will give you the "forward/North-turned Snap" ...the more distance you give this, the easier it is for the hammer to actually find the right snap... (see Screen) - Place normal Pillars on the Scaffolding until you reach the desired Height & add a small Wall, that will allow you to place Ceilings "Inside" - Use thin Pillars on the 70.5° Sides as Glue to hold the Floors (i would glue them into the Corners, but up to YOU ofc!) - Remove all Scaffolding Fill/close them however YOU like, just know, since its ONLY Triangle Ceilings, the Numbers add up QUICK! To close the Gap between the Ground and the Floor, you can snap ramps to the 70.5° and use "Triangle-Roof-Corners" to close this perfectly (like its made for This) I have one standing around my Well on Ragnarok for over a year now & its just n0ice, i think! PS: choose ONE Floorplate(Orientation)! ... for example: a "north turned" build triangle floor cant/wont connect to "different turns" of Triangles, thats why i didnt release "Tetraeder Corners", the 3 Floors wouldnt want to connect without extra Pillars, soo try ur best & keep it all "ONE BUILD Direction" to avoid support issues! Enjoy building YOUR own 70,5° Tetraeder's!
- 77 yapılar
- 2 Yapılar
- 1 Beğenmeler
Önizleme yokÜsler41Önizleme yokÜsler40Önizleme yokÜsler40Önizleme yokÜsler39Önizleme yokÜsler28Önizleme yokÜsler38Önizleme yokÜsler38
Üsler5Soporte para pilares
Con estos soportes podras construir correctamente la plataforma de stands y refris
- 17 yapılar
- 1 Beğenmeler
Önizleme yokÜsler35Önizleme yokÜsler34Önizleme yokÜsler36
Üsler12Önizleme yokÜsler20Önizleme yokÜsler30Önizleme yokÜsler30Önizleme yokÜsler29
Üsler12
Üsler11New Chapel Arch
The New Chapel's Arch This build replicates the "Front Arch" i build for my Chapel at the end of 2025, but they patched it impossible and i never released it, so now i made THIS one for you all! The Gate-Arch, Window-Ring & outer Arch are one Build The CellarDoors & "Wall"Ceiling Plates are offset by -16 "inside" Which makes this 3 "independent" Builds with separate Support! (this could be all fused into one, but it would require a whole pile of offsets & supports, which dont make sense to have really) - Place this like any foundation, or glue it into any 7-9 gap in a wall (leave the central (north turned) Foundation & snap this to it) - Make sure its placed low/high enough that the 8 essential Pillars see Ground (see Screen) , the 4 lower ones should be barely off the ground & the 4 higher ones will be created by the Thatch Foundations, but need to end up "low" enough so they become Foundations! this will also make sure that the Scaffolding "outside" is at the right Height! ...some small Pillars below the Cellar Doors will not auto-build, its "normal", thats why they have 4 - Remove all Thatch (disconnect the Ramps from the "Rings" first, leave the Scaffolding till last, just to be sure) - Fill the Ring & Arches on both sides with small Ceilings (and the 1 wall ontop of the window ring!) - Fill in the front & back "WallCelings" and the Windows - If you want to close/attach the normal Walls, you have to remove the outer small Walls on the big Arch (see Screen) & let the Walls "cut into" the Arches ceilings now replace the Arches small Walls - As with the other Gates, just use Foundations to cut through the Arches "Feet" - Fill the Arch/Ring/Gate with PillarBeams as much as u like & to close evtl Holes! Fully decked-out this Build can end up at around 650 Pieces PS: you could use the Arch itself as "Roof", but it would cost 14 small & 6 normal Walls just to have one Foundation length covered, that adds up quick!^^ Enjoy
- 597 yapılar
- 0 Beğenmeler
Önizleme yokÜsler28Önizleme yokÜsler16